Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan Fuse on VW Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuse box

See other generations:
Video tutorial

Are you having issues with your VW Polo? Is the air fan not working as it should? Let's see how to access the fuse box and replace the fuses. Use a plastic lever to remove the trim located on the side of the dashboard.

Locate the fuses and disconnect them using needle-nose pliers. Once this is done, insert the new fuses into their respective slots in the compartment.

Close the fuse inspection box with the trim cover. Test the correct operation of the vehicle by turning on the ignition and activating the fan.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan Resistor on a Volkswagen Polo
How to Replace the Cabin Fan Resistor on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Follow these instructions to remove and replace the cabin fan resistor on your Volkswagen Polo. First, get into the vehicle on the front passenger si…
Replacement of the Volkswagen Polo's cabin fan resistor
Replacement of the Volkswagen Polo's cabin fan resistor
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Below we will see the steps that will allow us to disassemble and replace the resistor of the cabin fan of the Volkswagen Polo. First, we get on boar…
Where is the Fan Fuse Located in a Volkswagen Polo?
Where is the Fan Fuse Located in a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) If the radiator fan in a Volkswagen Polo 6R suddenly stops working, first check the status of the respective fuse, which is located as shown in this …

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - Where is the wiper fuse located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Where is the Volkswagen Polo wiper relay located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos