Do it yourself
Frequently asked questions about cars and motorcycles

Engine oil and oil filter replacement

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Engine oil

Lift the vehicle on suitable car ramps to facilitate access to the oil sump, position a container of appropriate capacity under the oil sump and unscrew the drain plug (located at the rear of the sump in the central position) using an 18 mm spanner; once the draining is complete, replace the plug and tighten it properly. Next, move on to replacing the oil filter: remove the plastic cover and unscrew the filter (located near the oil dipstick and positioned upside down) using the appropriate tool; then screw in the new one after coating the gasket with oil without exceeding the tightening torque. Finally, fill the engine with new oil according to the quantities and SAE specifications indicated in the user and maintenance manual.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) The first step is to remove the plastic cover from the engine. Using the appropriate key with a hook, gently unscrew the oil filter and extract the c…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Replacing the oil filter on a VW Jetta? Let's look at removing the oil filter in the engine bay. Open the car's door and pull up the engine compartme…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) The first step is to remove the plastic engine cover. Using the appropriate socket, gently unscrew the oil filter and extract the cartridge from its …

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - What is the right amount of engine oil for the Volkswagen Golf 7 1.6 TDI? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos