Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Engine oil

The first step is to remove the plastic engine cover. Using the appropriate socket, gently unscrew the oil filter and extract the cartridge from its housing. Lift the vehicle and place a plastic sheet and a container under the engine to collect the oil. Unscrew the oil drain plug on the sump and allow the oil to drain. Replace the oil drain plug, refit the oil filter, and top up with new oil. Start the engine and check for proper operation. Do not dispose of used oil in the environment; take it to designated collection centres.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil Filter Replacement on a Volkswagen Golf
Oil Filter Replacement on a Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Replacing the oil filter on a VW Jetta? Let's look at removing the oil filter in the engine bay. Open the car's door and pull up the engine compartme…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) The first step is to remove the plastic cover from the engine. Using the appropriate key with a hook, gently unscrew the oil filter and extract the c…
How to replace the oil filter, engine oil, and air filter of the VW Golf 7
How to replace the oil filter, engine oil, and air filter of the VW Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The steps that make up the basic car service on a Volkswagen Golf 7 are quite simple to perform independently. The first step to be carried out is to…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - What is the right amount of engine oil for the Volkswagen Golf 7 1.6 TDI? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos