Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Up
    4. : Disassembly of the front fender of the Up

Volkswagen Up - Video tutorial

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Front bumper
Operation: Disassembly of the front fender of the Up

Disassembly of the damaged fender of a Volkswagen Up. Let's see how the front of the car is removed from above. We raise the bonnet and put it in safety, we lift the car on a jack; unscrew the fastening screws placed in the upper part of the mudguard. Once the screws in the upper part have been removed, we remove the stone guards under the fender (we remove the pins located in the lower part of the fender). We remove the mudguard from the car body by hand. We carry out the replacement of the mudguard following the disassembly operations. Remember to screw all the fastening screws around the mudguard.


Posted on 25 December 2023 by ScegliAuto



How to remove the door panel on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Let's see how to remove the door panel on a Volkswagen Up. Before starting the disassembly work, let's disconnect the battery terminals in the engine
How to disassemble the car stereo of a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Before starting, we will have to sit in the driver's seat of our Volkswagen Up. So let's start by disengaging and removing the car radio frame, lever
How to remove the door panel on Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) We carry out the disassembly of the door panel of a Volkswagen Up (left side). Before starting the disassembly work, let's disconnect the battery ter

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos