Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Ignition Switch

Model: Volkswagen Maggiolino MK 1 - Years: 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949
Part: Accessory kit

See other generations:
Video tutorial

To replace the ignition switch, you need to remove the steering wheel and the entire housing with the controls of the indicator stalk; then remove the plastic covers around the key switch and locate the hole on the side where a piece of stiff wire must be inserted to press the retaining tab of the switch and extract it. At this point, insert the new switch, orienting the retaining tab towards its respective seat.

Once inserted, the tab will click, and the switch will be secured.

Then remove the complete housing of the switch to access the electrical block of the ignition contacts and replace it.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

How to Replace the Ignition Switch on a Volkswagen Beetle
How to Replace the Ignition Switch on a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) Before starting, sit in the driver's seat of your Volkswagen Beetle. Begin by unclipping the horn and disconnecting its electrical connector. Next, r…
How to Replace the Ignition Switch on a Volkswagen Beetle
How to Replace the Ignition Switch on a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) Before starting, sit in the driver's seat of your Volkswagen Beetle. Begin by disengaging the horn and disconnecting the relevant electrical connecto…
Replacing the Door Sill Trim
Volkswagen Maggiolino (1938-1980 / MK 1) To facilitate the removal of the metal parts to be replaced, first remove the doors: remove the circlip from the hinge pin, then extract the pin and …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos