Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Transmission Drive Shaft Replacement

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Axle shaft

See other generations:
Video tutorial

The necessary tools are a ratchet spanner, a set of fixed spanners, a puller, and various pliers. Lift the car on a ramp and remove the wheels to access the mechanics.

Once the faulty steering transmission is identified, proceed with removal by taking it off the support, unscrewing all the bolts, and extracting the pins from the steering assembly. Use the puller and a pin to push the bolts out of their seats after thoroughly spraying them with penetrating oil. Remove the arms from the wheel side by unscrewing the retaining nut. Taking care not to damage the rubber boot, insert the new assembly into its seat.

Refit the arm and the rest of the previously removed mechanics.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Instructions for Replacing the Driveshaft
Instructions for Replacing the Driveshaft
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Lift the vehicle on a hydraulic lift and remove the front wheel; detach the central fastening bolt of the driveshaft from the hub; disconnect the bal…
Instructions for Replacing the Driveshaft Boot
Instructions for Replacing the Driveshaft Boot
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To replace the driveshaft boot, you need to remove the driveshaft to slide off the old boot and fit the new one. There is a product available called …
Replacing the Front Driveshaft of a Volkswagen Golf 6
Replacing the Front Driveshaft of a Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this video tutorial, see how to remove and replace the front driveshaft of a sixth series Volkswagen Golf, following the instructions below. First…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos