Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Air Conditioning Resistor

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Air conditioning

See other generations:
Video tutorial

In case of issues with the air conditioning system, one potential fault may reside in the heating resistor. To replace this component, start by removing the glove compartment and the underlying panel, then remove the fan assembly by undoing the three retaining screws and the power connector.

Locate the faulty resistor, carefully detach the power connector. Unscrew all retaining screws and gently extract the faulty part from its housing.

Replace the resistor with the new spare part and proceed to reassemble the removed parts.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Dismantling and Replacing the Air Conditioning Resistor
Dismantling and Replacing the Air Conditioning Resistor
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In case of issues with the air conditioning system, one potential fault could be the heating resistor. To replace this component, start by dismantlin…
How to Remove the Fan Resistor on Golf 5
How to Remove the Fan Resistor on Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Remove the fan resistor from a Golf? Here’s how to take it out from inside the cabin. Use a lever to remove the plastics under the dashboard where th…
How to Replace the Heating Element in a Volkswagen Golf?
How to Replace the Heating Element in a Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this tutorial, you will learn how to replace the heating element in a Volkswagen Golf, a very simple and quick operation. Before proceeding, ensur…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos