Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Light of a VW Jetta

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light

See other generations:
Video tutorial

Is the light on your car damaged? Let's look at removing the rear light of a VW Jetta. Open and lift the tailgate, access the luggage compartment side, and remove the cover.

Locate the retaining screws of the rear light: unscrew all screws securing the light. Use a lever to detach the light from its housing and disconnect the power connectors.

After replacing the damaged light with a new one, install the new light into the car's metalwork. Fit bulbs of the same size and voltage.

Test the operation of the bulbs in the new light.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

Volkswagen Jetta (2005-2010 / MK 5, A5) Let's look at how to remove the rear light of the VW Jetta. Lift the rear hatch and secure it, then remove the fabric cover that protects the boot li…
Volkswagen Jetta (2010-2018 / MK 6, A6) In this video tutorial, you will learn how to remove the rear light of the Volkswagen Jetta. First, open the boot and locate the cover on the side th…
Volkswagen Jetta (2005-2010 / MK 5, A5) Below are the instructions that will allow you to remove and replace the bulbs of the rear headlight of the Volkswagen Jetta. First, open the boot li…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos