Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs on a Volkswagen Passat B8 2.0 TDI

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part: Glow plugs

In today's video, we will see the instructions that will allow you to remove and replace the glow plugs on a Volkswagen Passat B8 2.0 TDI engine. First, open the bonnet of your car and start by removing the plastic engine cover; then disconnect the four wires from the glow plugs and use a 10 mm socket with an extension to unscrew and remove the glow plugs, as shown in the video. At this point, replace them with new ones, screwing them in by hand and then tightening with a spanner; reconnect their wires and refit the engine cover!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glow Plugs on the Volkswagen Passat TDI
How to Replace the Glow Plugs on the Volkswagen Passat TDI
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) In this guide, discover the steps to remove and replace the glow plugs in the engine of the Volkswagen Passat with a TDI engine. First, open the bonn…
How to Replace the Glow Plugs on a Volkswagen Passat 2.0 TDI
How to Replace the Glow Plugs on a Volkswagen Passat 2.0 TDI
Volkswagen Passat (2005-2010 / B6, 3C) In this brief tutorial, learn how to replace the glow plugs on a Volkswagen Passat 2.0 TDI, produced from 2005 to 2010. Start by opening the bonnet a…
Replacing Glow Plugs on VW Passat 140 bhp
Volkswagen Passat (2005-2010 / B6, 3C) If you have issues with the glow plugs on the Passat, it's best to replace them. Here's how. Pull the lever to open the engine compartment located at…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos