Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Handle and Lock on a Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Handle

See other generations:
Video tutorial

This guide shows how to disassemble the external handle of the Polo along with the door cover panel. Disconnect the battery terminals located in the engine bay. Open the car door, and using a lever, remove the plastic cover of the large internal handle: unscrew the securing screws located inside, and unscrew the screws on the side of the door.

Detach the door panel, disconnect any power connectors and release cables. Once the cover panel is removed, unscrew the securing screws of the handle and the lock (external cylinder).


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Removing the Lock and Door Handle of the Volkswagen Polo
Removing the Lock and Door Handle of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Follow these steps to remove and replace the lock and external handle of the front door of the Volkswagen Polo. First, open the front door and start …
Replacing the Rear Door Lock on a Volkswagen Polo
Replacing the Rear Door Lock on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Here are the steps to remove and replace the rear door lock on a Volkswagen Polo. First, open the rear door of the vehicle and start by removing the …
Removing the Rear Door Lock from a Polo
Removing the Rear Door Lock from a Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) How do you remove the lock from a Polo with a stuck door? To access the lock, you need to remove the door panel. Enter the vehicle, unscrew the secur…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos