Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Heater Radiator from a Volkswagen Passat B6

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Heater core

In this video tutorial, you will see the main steps on how to remove the internal heater radiator from a Volkswagen Passat B6. First, get inside the vehicle and remove the side Torx screws located at the bottom on the driver's side, on the right; once the side plastic panel is removed, access the fuse box by removing all the plastics present at the bottom. At this point, move to the engine compartment to disconnect the heating pipes and unscrew the Torx screws securing the radiator, removing it from inside the car!

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cabin Heater Radiator from a Volkswagen Passat
How to Remove the Cabin Heater Radiator from a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Before you can start, open the front bonnet of your Volkswagen Passat. Begin by unclipping and removing the air filter hose. This will give you acces…
Removing the Heating Radiator from a Volkswagen Passat B6
Removing the Heating Radiator from a Volkswagen Passat B6
Volkswagen Passat (2005-2010 / B6, 3C) In this video, learn how to remove the heating radiator from a Volkswagen Passat B6 by following these instructions. First, access the front and remo…
Removing the Internal Radiator of the Volkswagen Passat
Removing the Internal Radiator of the Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Let’s discover in this brief guide the steps that will allow you to remove and replace the heating radiator of the Volkswagen Passat. First, open the…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos