Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cylinder Head Gasket on the Volkswagen Fox 1.2

Model: Volkswagen Fox MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Cylinder head

See other generations:
Video tutorial

In today's video tutorial, learn how to remove and replace the cylinder head gasket on the Volkswagen Fox 1.2, as well as on the 1.4 petrol version, by following the instructions below. First, open the bonnet of your car and start by removing the cylinder head cover by unscrewing all the fastening screws; then unscrew all the bolts of the cylinder head itself to remove it, as shown in the video.

At this point, remove and replace the old gasket; before reassembling, clean the gasket seating area thoroughly, following the video until the end!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the Volkswagen Fox
Where to Find the Fuse Box of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) To find the fuse box of your Volkswagen Fox (2003-2011) easily and safely, follow these simple steps. First, enter the cabin and ensure the car is co…
Where to find and how to reach the fuse box of a Volkswagen Fox?
Where to find and how to reach the fuse box of a Volkswagen Fox?
Volkswagen Fox (2003-2011 / MK 1) Good morning, today’s objective is to find out where the fuse box of your Volkswagen Fox is located and how to access it. Start by sitting in the dri…
Replacing the Front Headlight Bulbs of the Volkswagen Fox
Replacing the Front Headlight Bulbs of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) This guide shows how to remove and replace the front headlight bulbs of the Volkswagen Fox. First, open the bonnet and start by removing the plastic …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos