Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door of a Volkswagen Passat B5?

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Car door

See other generations:
Video tutorial

In this tutorial, you will see how to remove the rear door of a Volkswagen Passat B5, a guide that is also valid for other models from the same generation of the German manufacturer. First, disconnect the various connections, which can be done with the rear door closed and the front door open.

At mid-height, you will notice the large seal protecting the connections; move it aside and, using a screwdriver, disconnect the connectors. The next step is to loosen the bolts of the upper hinge, and then remove those of the lower hinge.

This stage requires a second person, as you will need to support the door when removing the previously loosened hinge.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) Before you can start, open the door of your Volkswagen Passat. Begin by unclipping and removing the insert of the door handle panel, using a thin but…
Volkswagen Passat (2005-2010 / B6, 3C) This excellent video guide is useful for anyone needing to remove the door handle of their Volkswagen Passat B6, whether for inspection, repair, or o…
Volkswagen Passat (1996-2005 / 3BG, B5) It will be possible to deactivate the alarm of the Volkswagen Passat by first closing all the door locks, pressing the appropriate button located on …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos