Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Position/Rev Sensor on the Volkswagen New Beetle

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Crankshaft position sensor

In today's tutorial, we will see how to remove and replace the crankshaft position sensor or the rev sensor on the Volkswagen New Beetle first series. First, lift the vehicle and locate the crankshaft position sensor, which is situated within the bracket between the engine and the gearbox; unscrew the two securing bolts of the sensor and disconnect the connector tab to remove it and replace it with the new one. At this point, reconnect the crankshaft position sensor and reassemble everything, following the video to the end!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen New Beetle (1999-2012 / MK 2, 9C) In this guide, you will find the instructions that will allow you to remove the roof position sensor on a Volkswagen Beetle Cabriolet, also known as …
Volkswagen New Beetle (2011-2018 / MK 3) To set the clock of the Volkswagen New Beetle, start by turning on the instrument panel without starting the car engine, press the button to the righ…
Volkswagen New Beetle (2011-2018 / MK 3) In this tutorial, you will see how to reset the service indicator in the Volkswagen New Beetle, a very simple and quick operation to perform only aft…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos