Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Unlock the Rear Door of the Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Car door

To unlock the rear door of the Volkswagen Polo, you need to remove the door panel to access the lock. To do this, detach the window lift knob and loosen all the screws securing the panel. Once the panel is removed, loosen the screws that secure the lock to the door, disconnect it, and slide it out of its housing. When removed, unlock it as shown in the tutorial and reinstall it back inside the door. This way, you can reassemble all the components that were removed.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Door Lock on a Volkswagen Polo
Replacing the Rear Door Lock on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Here are the steps to remove and replace the rear door lock on a Volkswagen Polo. First, open the rear door of the vehicle and start by removing the …
How to unlock the Volkswagen Polo locks with a dead remote battery?
How to unlock the Volkswagen Polo locks with a dead remote battery?
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this tutorial we can see how to unlock the locks of the Volkswagen Polo in case the remote control battery is completely discharged. First of all,…
How to open the rear hatch of the Volkswagen Polo
How to open the rear hatch of the Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Today we will see the instructions that will allow us to open the rear hatch of the Volkswagen Polo in different ways. First of all, let's move to th…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos