Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Jetta
    4. : How to reprogram the remote control of the key on the Volkswagen Jetta - Passat

Volkswagen Jetta - Video tutorial

Model: Volkswagen Jetta MK 5, A5 - Years 2005-2010
Part: Checks and maintenance
Operation: How to reprogram the remote control of the key on the Volkswagen Jetta - Passat

In this video tutorial we will see how to program the remote control of the key on the Volkswagen Jetta fifth series, but also on the Passat B6. First of all, let's get both keys to the car; after which we go to insert the first key and turn on the ignition. At this point we close the front door and with the other key we go to lock the car, inserting it in the lock cylinder and pressing the door closing button for about ten seconds; in this way our remote control will be reprogrammed to close the doors!


Posted on 15 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Jetta 2010-2018 - Why won't the hood of the Volkswagen Jetta open? Read Answer
    • Jetta 1998-2005 - What is the position of the temperature sensor on the Jetta A4 car? Read Answer
    • Jetta 2010-2018 - What does the airbag warning light on the Volkswagen Jetta indicate? Read Answer
    • Jetta 2005-2010 - What are the issues found on the Volkswagen Jetta 1.6 TDI? Read Answer
    • Jetta 2010-2018 - What does the Volkswagen Jetta oil light indicate? Read Answer
    • Jetta 2018-2025 - What does the warning light with a triangle and an exclamation mark mean in the Volkswagen Jetta? Read Answer
    • Jetta 1998-2005 - How many liters of automatic transmission oil does a Jetta A4 need? Read Answer
    • Jetta 1998-2005 - What is the Volkswagen Jetta A4 fuse cover? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos