Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the CD Player from a Volkswagen Polo

Model: Volkswagen Polo Polo 3, MK III, 6N, Polo III, MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Car stereo

See other generations:
Video tutorial

Before you can start, sit in the driver's seat of your Volkswagen Polo. Begin by inserting the extraction keys into the holes on the front of the CD player to release the internal clips that secure the CD player to the dashboard. Once done, pull the CD player out of its slot in the centre console.

At this point, disconnect the relevant electrical connectors. Once this step is complete, you can finally remove the CD player from your Volkswagen Polo, and the disassembly will be finished.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Removal of the Centre Console and Installation of CD Player
Removal of the Centre Console and Installation of CD Player
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) First, unclip the storage shelf located at the top of the centre console and remove the screws underneath; take off the trim around the climate contr…
How to Remove the Sun Visor Light on a Volkswagen Polo
How to Remove the Sun Visor Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before you can begin, sit in the driver's seat of your Volkswagen Polo. Start by inserting the tip of a thin but sturdy tool into the gap between the…
Guide to Removing the Fuel Pump from the Volkswagen Polo
Guide to Removing the Fuel Pump from the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today's guide will show you how to remove and replace the fuel pump in the Volkswagen Polo by following these simple steps. First, open the rear door…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos