Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace the air filter on the Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo III, Polo 3, MK III, 6N, MK 3 - Years 1994-2003
Part: Air filter
Operation: How to replace the air filter on the Volkswagen Polo

Replacing the Volkswagen Polo air filter is undoubtedly one of the simplest operations among those that can be performed independently and without the intervention of an expert in the sector. Just follow the instructions below. First stop the engine, let it cool down and make sure you place the car on a level surface with the handbrake activated. Then lift the front hood completely and locate the plastic box located in the upper left part of the engine compartment. Remove the cover and immediately below you will have the used air filter. Replace it with the new model and replace the cover correctly. Finally, close the hood.


Posted on 12 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - Where is the Volkswagen Polo air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos