Do it yourself
| ||||
|
Volkswagen Jetta - Video tutorial
Model: Volkswagen Jetta
- Years 1979-1991 In order to replace the Volkswagen Jetta door panel, loosen the screws that secure the handrail and remove it. Next, you will need to loosen the bolt that acts as a pivot for the window crank. Then it will be necessary to pry the inside of the handle to pry and remove the cover: the screw underneath will have to be loosened in order to remove the entire block of the handle. At this point, it will be possible to unhook the whole panel, always using the same screwdriver as a lever. Once the old panel is completely removed, it can be replaced.
Posted on 20 April 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |