Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Installation of Car Radio

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Car stereo

See other generations:
Video tutorial

This video shows how to remove and install a car radio in your vehicle. First, proceed with the removal; take off the upper part of the dashboard that is clipped in, along with its screws located underneath.

Next, remove the air vents, which are also clipped in, then unscrew the screws of the stereo fascia located at the top and extract the fascia, which is still clipped in. Once removed, unscrew the screws of the car radio and pull it outwards; once removed, disconnect the relevant connectors, being careful with the various wires.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

How to Replace the Fuses of the Volkswagen Golf Radio
How to Replace the Fuses of the Volkswagen Golf Radio
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, we will see how to access the fuses of the radio and how to replace them on the Volkswagen Golf. First, open the bonnet of th…
How to Find and Enter the Radio Code for the Volkswagen Golf
How to Find and Enter the Radio Code for the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today's instructions will show you how to find and enter the radio code for the Volkswagen Golf in simple steps. First, get inside the cabin and star…
How to Remove the Radio from a VW Golf 5
How to Remove the Radio from a VW Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The steps to remove the radio from a Volkswagen Golf 5 are: - remove the side cover; - unscrew the four Torx screws; - extract the radio; - disconnec…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos