Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the Windscreen Washer Pump of the Volkswagen Golf

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Pump

In today's tutorial video, you will learn how to access the pump and the windscreen washer system of the Volkswagen Golf, GTI version, by following the instructions below. First, open the bonnet of your car and start by removing the front grille; then lift the vehicle and remove the wheel arch clips, also unscrewing all the Torx screws, as shown in the video. At this point, access the windscreen washer pump by disconnecting the connectors to remove and replace it; then reassemble everything, following the tutorial video until the end!

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Water Pump on VW Golf 5
Replacing the Water Pump on VW Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Replace the water pump on the Golf 5. Remove some components from inside the engine bay to access the water pump. Lift the front bonnet of the car to…
How to Replace the Water Pump on a Volkswagen Golf 7?
How to Replace the Water Pump on a Volkswagen Golf 7?
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To replace the water pump on a Volkswagen Golf 7, open the bonnet to access the engine compartment and locate the pump, which is at the front of the …
How to Replace the Water Pump on a Volkswagen Golf 2?
How to Replace the Water Pump on a Volkswagen Golf 2?
Volkswagen Golf (1983-1992 / MK 2, Golf 2) To replace the water pump on a Volkswagen Golf 2, open the bonnet to access the engine bay and remove the cap from the coolant reservoir. After remov…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos