Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump in a Volkswagen Golf?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Fuel pump

See other generations:
Video tutorial

As seen in this tutorial, replacing the fuel pump in the Volkswagen Golf MK6 is a very simple and quick operation. First, go to the rear seats, grasp the seat from one side, and pull upwards to detach it from the base.

After repeating this on the opposite side, completely remove the seat, take off the pump cover, and disconnect the first connector. At this point, disconnect both pipes and unscrew the large outer ring using a flat-head screwdriver.

To install the replacement, simply follow the reverse procedure.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today's guide will show you how to dismantle and replace the fuel pump on a Volkswagen Golf in simple and quick steps. First, open the rear doors and…
How to Change the Fuel Pump in a Volkswagen Golf
How to Change the Fuel Pump in a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this tutorial video, see how to remove and replace the fuel pump in a Volkswagen Golf by following the instructions below. First, open the rear do…
How to Remove the Fuel Pump from the Volkswagen Golf
How to Remove the Fuel Pump from the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this brief and simple guide, you will find instructions on how to remove and replace the fuel pump from the Volkswagen Golf. First, open the rear …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos