Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

This video illustrates how to reset the warning lights on your dashboard. If you have carried out work on your car and warning lights have appeared on the dashboard, you will need to reset them.

To reset the warning lights, simply use the buttons for the onboard computer. First, press and hold the button on the right for about ten seconds to reset the mileage.

Then, rotate the other button of the onboard computer to the right. Finally, turn the ignition back on and check if the warning lights are still present.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this short guide, we will see the instructions that will allow us to reset the warning lights that appear on the instrument panel after replacing …
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Below we will outline the steps to reset the AdBlue refill warning on the Volkswagen Golf 2.0 TDI. Before performing the reset, it is essential to ha…
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The service maintenance warning light is primarily a reminder for the driver to perform general maintenance on the vehicle. To reset the light and re…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - What does the Volkswagen Golf error code P171900 indicate? Read answer
    • Golf 2008-2012 - What does the p171900 fault code indicate, in the Volkswagen Golf? Read answer
    • Golf 2019-2026 - How to reset the Volkswagen Golf Infotainment system? Read answer
    • Golf 2008-2012 - What does the fault code 00883 mean in the Volkswagen Golf? Read answer
    • Golf 2012-2019 - What does the Volkswagen Golf error P171900 mean? Read answer
    • Golf 2019-2026 - How to reset the Infotainment system in the Volkswagen Golf 8? Read answer
    • Golf 1997-2003 - What does the DSG error message on the Volkswagen Golf Mk4 mean? Read answer
    • Golf 2012-2019 - What to do when the brake pad warning light comes on on my Golf 7? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos