|
Do it yourself
| |||
| ||||
Resetting the Inspection Notification on the Volkswagen Golf
Model: Volkswagen Golf
Golf VII, MK 7, Golf 7
- Years 2012-2019
If you have replaced the engine oil and the corresponding filter on this vehicle, you must then proceed to update and reset the service light that has illuminated on the dashboard. The following description provides instructions on how to proceed, and you can also watch the video. After sitting in the driver's seat, locate the button positioned at the centre of the lower part of the instrument cluster and press it, holding it down. Then, turn on the ignition. The display will show a prompt to confirm the service reset, so release the button and press it again to confirm, after which the indicator will turn off.
Updated on 29 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
When you start your seventh generation Volkswagen Golf and the oil change notification appears on the display, it means it's time for a service. Afte…
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
To reset the inspection light on a Volkswagen Golf VII, use the "0.0" or "SET" button on the dashboard. With the ignition off, press and hold this bu…
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
When the service notification appears on the display, it means it is time to perform the periodic maintenance with the oil change. Today we will see …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.103
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |