Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump in a Golf 7?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Pump

See other generations:
Video tutorial

This video thoroughly explains how to replace the water pump in a Golf 7. Remember that during these steps, it is advisable to also replace the timing belt, an important element for the operation of the pump itself. As the tutorial explains, the first thing to do before starting is to drain the coolant and free the water pump.

Only after this step can you begin to undo the pump screws, following a specific order. Once this phase is complete, you can proceed to install the new pump, which will follow the steps presented in the video.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

Replacing the Water Pump on VW Golf 5
Replacing the Water Pump on VW Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Replace the water pump on the Golf 5. Remove some components from inside the engine bay to access the water pump. Lift the front bonnet of the car to…
How to Replace the Water Pump on a Volkswagen Golf 1.4 TSI
How to Replace the Water Pump on a Volkswagen Golf 1.4 TSI
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Below is the guide showing the procedure for removing and replacing the water pump on a Volkswagen Golf 1.4 TSI. First, open the bonnet of the vehicl…
How to Replace the Water Pump on a Volkswagen Golf 3?
How to Replace the Water Pump on a Volkswagen Golf 3?
Volkswagen Golf (1991-1997 / MK 3, Golf III, Golf 3) To replace the water pump on a Volkswagen Golf 3, open the bonnet to remove the cover from the top of the engine. Additionally, since the water pump …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos