Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Jetta
  6. : Replacement discs and rear pads

Volkswagen Jetta - Video tutorial

Model: Volkswagen Jetta MK 5, A5 - Years 2005-2010
Part: Brake discs
Operation: Replacement discs and rear pads

Once the car has been raised and the rear wheels removed, unscrew the fixing pins of the brake caliper, remove the old pads and remove the caliper support; remove the pin fixing the disc to the hub and then the disc itself; retract the calliper cylinder by rotating it with the special tool; clean the disc from protective oil, clean the hub seat and apply the new disc; then install the caliper support, the new pads and the caliper itself, lubricating the pins. Refit the wheel and pump on the brake pedal until it offers the right resistance; however pay attention to the first braking.


Posted on 5 August 2023 by ScegliAuto



Replacement pads and rear brake discs
Volkswagen Jetta (2005-2010 / MK 5, A5) Disassemble the wheel and carefully disassemble the caliper by removing the two stops with a ratchet wrench. Remove the brake fluid pipe that feeds t
Removing the front brake discs
Volkswagen Jetta (2005-2010 / MK 5, A5) If the front brake discs have to be removed, start by loosening the wheel fixing pins before lifting the car and then positioning it on suitable car
How to replace Volkswagen Jetta brake discs and pads
Volkswagen Jetta (2005-2010 / MK 5, A5) To replace the Volkswagen Jetta brake discs and pads, lift the car at the front, remove the right wheel, remove the caps behind the caliper to unscre

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos