|
Do it yourself
| |||
| ||||
Removing Front Brake Discs
Model: Volkswagen Jetta
MK 5, A5
- Years:
2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
To remove the front brake discs, start by loosening the wheel bolts before lifting the vehicle and placing it on suitable axle stands to complete the wheel removal; if the brake pads do not need replacing, you can remove the caliper along with its support: leverage between the disc and pads to slightly retract the piston and proceed to remove the bolts securing the caliper support, taking care not to pinch the brake fluid hose; at this point, you can unscrew the disc fixing screw on the hub and remove it; clean and lubricate the disc seat on the hub and refit the disc after having it skimmed: this operation can only be performed if the disc thickness is still within specification after skimming; additionally, when skimming the discs, it is advisable to install a new set of pads.
Updated on 19 February 2026 by ScegliAuto
Related tutorials
Volkswagen Jetta
(2005-2010 /
MK 5, A5)
To replace the brake discs and pads on the Volkswagen Jetta, lift the front of the car and remove the right wheel. Remove the caps behind the caliper…
Volkswagen Jetta
(2005-2010 /
MK 5, A5)
Once you have raised the vehicle and removed the rear wheels, undo the retaining bolts of the brake caliper, extract the old pads, and remove the cal…
Volkswagen Jetta
(2005-2010 /
MK 5, A5)
Below are the main instructions useful for removing and replacing the rear brake light switch on the Volkswagen Jetta, as well as the Golf. First, op…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.037
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
