Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Seats of the Volkswagen New Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Seat

See other generations:
Video tutorial

Let’s discover the procedure needed to remove the front seats of the Volkswagen New Beetle (or Maggiolone) in simple steps. First, open the front door and start by removing the plastic covers found on the front seat rails; then unscrew the Torx screws located on both sides of the rails, as shown in the video.

Now disconnect the electrical connector found under the seat to remove it from the vehicle; perform the same operation for the removal of the other seat, finally reassembling everything!


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Remove the Roof Position Sensor on a Volkswagen Beetle (Maggiolone)
How to Remove the Roof Position Sensor on a Volkswagen Beetle (Maggiolone)
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In this guide, you will find the instructions that will allow you to remove the roof position sensor on a Volkswagen Beetle Cabriolet, also known as …
How to Dismantle the Clutch Cylinder or Pump of the Volkswagen New Beetle 2.5L
How to Dismantle the Clutch Cylinder or Pump of the Volkswagen New Beetle 2.5L
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In this brief and simple guide, you will learn how to dismantle and replace the clutch cylinder or pump of the Volkswagen New Beetle 2.5L. First, ope…
How to Remove the Position/Rev Sensor on the Volkswagen New Beetle
How to Remove the Position/Rev Sensor on the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In today's tutorial, we will see how to remove and replace the crankshaft position sensor or the rev sensor on the Volkswagen New Beetle first series…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos