Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Clutch and Flywheel Replacement

Model: Volkswagen Transporter T25, T3, MK 3 - Years 1979-1990
Part: Clutch

Replacing the clutch and flywheel requires good general mechanical knowledge and some tools; apply the outer o-ring and the central guide bearing at the rear of the flywheel before securing it to the crankshaft by tightening the respective fixing bolts on the central flange, preventing the flywheel from rotating to achieve the correct torque; clean the flywheel surface thoroughly to remove any oil residue, then fit the clutch disc by tightening the respective fixing bolts; insert the alignment dowels of the gearbox and install the latter.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Gearbox
Instructions for Removing the Gearbox
Volkswagen Transporter (1979-1990 / T25, T3, MK 3) The engine of the vehicle in question is positioned at the rear: start by opening the engine bay and giving a general clean before beginning to disma…
How to adjust the height of the steering wheel and seat on the Volkswagen Transporter
How to adjust the height of the steering wheel and seat on the Volkswagen Transporter
Volkswagen Transporter (2014-2025 / MK 6, T6) Today, you will learn how to adjust the steering wheel and driver’s seat position on the Volkswagen T6. To adjust the steering wheel position, pull t…
Fuse Diagram for the Volkswagen T6
Fuse Diagram for the Volkswagen T6
Volkswagen Transporter (2014-2025 / MK 6, T6) Below is the detailed fuse diagram located in the engine bay of the vehicle: 1 radiator fan; 2 auxiliary cooling pump; 3 heater; 5 DSG automatic gear…

Other guides you may be interested in

    Frequently Asked Questions

    • Transporter 2003-2014 - Where is the clutch oil tank on the Volkswagen Transporter T5 located? Read answer

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos