Do it yourself
Frequently asked questions about cars and motorcycles

How to Program the Remote Control of the Volkswagen Passat

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Key

See other generations:
Video tutorial

In this video tutorial, you can see how to program the remote control of the Volkswagen Polo by following a few simple steps that will guide you towards proper management of your vehicle. First, turn on the ignition and leave the first key in the ignition.

Next, lock the vehicle using the second key in the lock. Now press the button to unlock once; you should hear a horn sound.

Wait 10 seconds and press the unlock button once to code the remote control number "ONE". At this point, turn off the ignition, remove the key from the vehicle, and test the remote control to see if it works correctly.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) In this video, you can see how to programme the remote control of the Volkswagen Passat. First, take the first key, insert it into the designated slo…
Volkswagen Passat (2010-2014 / B7) In this tutorial, you will see how to programme a new remote for the Volkswagen Passat, a very simple and quick operation. To do this, you will need …
Volkswagen Passat (2005-2010 / B6, 3C) In this video tutorial, you will learn how to program the ignition key and door locks of the Volkswagen Passat. First, take your remote control and r…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Passat 2010-2014 - What to do if the Passat key does not open the car? Read answer

Guide to replacing the 12V battery on the Toyota Yaris Cross

Today, we will go through the main instructions to remove and replace the 12V battery on the Toyota Yaris Cross. First, open the right rear door of the vehicle and start by removing the plastic cover located under the seat in the corner. You will find the battery inside, where you will disconnect both battery terminals (positive and negative), as shown in the video. Now, remove and replace the battery with a new one of the correct type and the same amperage; then, reinstall the battery and finally the plastic cover.

Watch the video!


by ScegliAuto

More videos