|
Do it yourself
| |||
| ||||
How to programme a new remote for the Volkswagen Passat?
Model: Volkswagen Passat
B7
- Years:
2010, 2011, 2012, 2013, 2014
Video tutorial
In this tutorial, you will see how to programme a new remote for the Volkswagen Passat, a very simple and quick operation. To do this, you will need a working key and the scanner shown in the video, which can also be found online. Start by connecting the scanner to the OBD port located in the lower left area of the dashboard, then insert the working key and turn on the ignition. Next, select the correct model on the device, start the scan, and enter the "Key Add" section. At this point, simply follow all the instructions provided on the display and finally test the new remote.
Updated on 6 August 2026 by ScegliAuto
Related tutorials
Volkswagen Passat
(2005-2010 /
B6, 3C)
In this video, you can see how to programme the remote control of the Volkswagen Passat. First, take the first key, insert it into the designated slo…
Volkswagen Passat
(2005-2010 /
B6, 3C)
To replace the battery in the Volkswagen Passat remote, press the button located at the top of the remote and pull the key out from its housing. Once…
Volkswagen Passat
(2005-2010 /
B6, 3C)
Replacing the battery of the key remote for a Volkswagen Passat is a very simple task that does not require special tools. Take the key remote and pr…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Frequently Asked QuestionsGuide to replacing the 12V battery on the Toyota Yaris Cross
Today, we will go through the main instructions to remove and replace the 12V battery on the Toyota Yaris Cross. First, open the right rear door of the vehicle and start by removing the plastic cover located under the seat in the corner. You will find the battery inside, where you will disconnect both battery terminals (positive and negative), as shown in the video. Now, remove and replace the battery with a new one of the correct type and the same amperage; then, reinstall the battery and finally the plastic cover. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.098
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |