Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Key for the Volkswagen Passat

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Key

See other generations:
Video tutorial

In this video tutorial, you will learn how to program the ignition key and door locks of the Volkswagen Passat. First, take your remote control and remove the physical key from inside it; then remove the plastic cover from the opening handle by first locking and then unlocking the vehicle to program the lock, as shown in the video.

At this point, get inside the vehicle and also check the operation of the key for starting the engine after programming it via computer!


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to Program the Key of the Volkswagen Passat?
How to Program the Key of the Volkswagen Passat?
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) To program the key of the Volkswagen Passat, insert the key to be programmed into the ignition barrel. Once the key is inserted, connect a diagnostic…
How to Program the Key of the Volkswagen Passat with OBDStar Tool
How to Program the Key of the Volkswagen Passat with OBDStar Tool
Volkswagen Passat (2005-2010 / B6, 3C) Today's guide will show you the main information on how to program the remote and key of the Volkswagen Passat using the OBDStar computer with the ap…
How to Program the Key for the Volkswagen Passat?
How to Program the Key for the Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) To program the key for the Volkswagen Passat, insert the blank key into the ignition switch: once it is inserted, connect a diagnostic tool to the ve…

Other guides you may be interested in

    Frequently Asked Questions

    • Passat 2010-2014 - What to do if the Passat key does not open the car? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos