Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the Volkswagen New Beetle

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Engine oil

This guide shows you how to replace the engine oil and oil filter, performing the regular maintenance service for the Volkswagen New Beetle. First, lift the vehicle and start unscrewing the oil drain bolt found on the sump, using a socket or spanner, allowing it to drain into a container for about ten minutes. At this point, unscrew the oil filter cartridge and replace it with a new one; then top up with new engine oil, checking the level with the dipstick!

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Change Oil on New Beetle
Change Oil on New Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Do you want to change the oil and filter on the New Beetle? Here’s how to replace the oil and filter. Open the car door and pull up the engine compar…
How to Replace the Engine Oil Filter on Volkswagen New Beetle
How to Replace the Engine Oil Filter on Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) How do you replace the engine oil filter on Volkswagen New Beetle? Follow this guide for the replacement: open the car door and lift the engine compa…
How to Replace the Oil Pump on the Volkswagen New Beetle
How to Replace the Oil Pump on the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) To replace the oil pump on the Volkswagen New Beetle, remove all the bolts securing the oil sump, as shown in the video. To remove the oil sump, use …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos