Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change Oil on New Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Oil filter

See other generations:
Video tutorial

Do you want to change the oil and filter on the New Beetle? Here’s how to replace the oil and filter. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Unscrew the large fastening bolt of the container cap where the oil filter is located.

Lift the car on a jack and unscrew the bolt from the oil sump, allowing the fluid to drain into a container. Refill with new fluid and close the front bonnet.

Replace the oil filter located under the car's engine compartment.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to replace the engine oil and oil filter of the Volkswagen New Beetle
How to replace the engine oil and oil filter of the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) This guide shows you how to replace the engine oil and oil filter, performing the regular maintenance service for the Volkswagen New Beetle. First, l…
How to Replace the Oil Pump on the Volkswagen New Beetle
How to Replace the Oil Pump on the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To replace the oil pump on the Volkswagen New Beetle, remove all the bolts securing the oil sump, as shown in the video. To remove the oil sump, use …
How do you set the clock on the Volkswagen New Beetle?
How do you set the clock on the Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In order to adjust the clock of the Volkswagen New Beetle, you need to turn on the instrument panel by inserting the key into the ignition switch: on…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos