Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Filter Support Seal Replacement

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Engine

See other generations:
Video tutorial

The issue shown in the video is a fairly unusual defect but easily resolved: it involves an oil leak from behind the oil filter support due to deterioration of the sealing gasket (o-ring). To replace this gasket, it is necessary to remove the oil filter, which is located just above the sump, then unscrew the fitting to which the filter is screwed, which also serves as a mounting point for the filter support; once the filter support is removed from its place, take out the o-ring and replace it with a new one that also has specific holes for securing during installation; then proceed in reverse for reassembly and restore the oil level.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacing Cabin Air Filter
Replacing Cabin Air Filter
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The cabin air filter is located in the engine compartment, on the passenger side, just below the windscreen: open the bonnet, remove the seal at the …
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Lifting the vehicle on a ramp makes it easier to drain the oil and remove the filter, which is located just above the sump at the front of the engine…
Engine Oil and Oil Filter Replacement for Volkswagen Golf 4
Engine Oil and Oil Filter Replacement for Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video tutorial, you will learn how to replace the engine oil and oil filter of a Volkswagen Golf 4. First, lift the car and remove the Torx s…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos