Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Checking the Rear Wheel Speed Sensor

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Wheel

If the ABS warning light comes on the dashboard and the diagnosis detects a fault code related to the right rear wheel speed sensor, before replacing the sensor itself, it is advisable to perform some checks; therefore, lift the vehicle on a ramp and locate the speed sensor: it is located on the hub; then disconnect the plug and check that the pins are not oxidised; measure the sensor's resistance using a multimeter set to the various scales: if you cannot measure on any scale, it means the sensor circuit is open and needs to be replaced (cable damage can be ruled out). For confirmation, you can measure on a functioning sensor. Then proceed to replace the sensor by first removing the wheel, then the sensor mounting bolt to extract it from its seat; apply grease to the new sensor before inserting it.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the ABS Sensor on a Volkswagen Golf 4
How to Replace the ABS Sensor on a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this video tutorial, you will see how to replace the ABS sensor on a Volkswagen Golf by following these essential steps: First, loosen the bolts o…
Replacement of Rear ABS Sensor
Replacement of Rear ABS Sensor
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) For your convenience during the process, it will be necessary to remove the wheel. Now, clean the connector that connects to the sensor. Unscrew the …
Replacing the Rear Wheel Bearing on a Volkswagen Golf
Replacing the Rear Wheel Bearing on a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this video tutorial, you will learn how to remove and replace the rear wheel bearing on a fourth-generation Volkswagen Golf. First, lift the vehic…

Other guides you may be interested in

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos