Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the speed sensor located on the Volkswagen Golf and how to replace it?

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Checks and maintenance

See other generations:
Video tutorial

This video shows where the speed sensor is located on the Volkswagen Golf MK4 and how to proceed if you need to replace it. As shown, it is located on the left side of the engine, or to your right when looking at the car from the front. To access and then remove it, first remove the indicated engine mount.

To do this, position a jack under the gearbox, then undo the two indicated bolts and follow the black cable until you find the sensor. Disconnect it using a flathead screwdriver and unscrew the mounting screw of the base.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

Where is the Oil Pressure Sensor Located on the Volkswagen Golf?
Where is the Oil Pressure Sensor Located on the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video, see where the oil pressure sensor is located on the Volkswagen Golf and how to proceed if you need to replace it, a very simple task. …
Checking the Rear Wheel Speed Sensor
Checking the Rear Wheel Speed Sensor
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) If the ABS warning light comes on the dashboard and the diagnosis detects a fault code related to the right rear wheel speed sensor, before replacing…
Where is the Crankshaft Position Sensor Located in the Volkswagen Golf?
Where is the Crankshaft Position Sensor Located in the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video, you will see where the crankshaft position sensor is located in the Volkswagen Golf, useful in case you need to replace it due to a fa…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos