Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear ABS Sensor

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Accessory kit

See other generations:
Video tutorial

For your convenience during the process, it will be necessary to remove the wheel. Now, clean the connector that connects to the sensor.

Unscrew the bolt that secures the sensor to the brake body. Using a flathead screwdriver, disconnect the plug from the sensor.

Apply some anti-rust to the sensor attachment to facilitate extraction. Next, proceed to remove the brake piston body and the disc.

This will allow you to work on this side of the sensor as well. Once the sensor is extracted, simply install the new one and retrace the steps in reverse for reassembly.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Replace the ABS Sensor on a Volkswagen Golf 4
How to Replace the ABS Sensor on a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video tutorial, you will see how to replace the ABS sensor on a Volkswagen Golf by following these essential steps: First, loosen the bolts o…
Checking the Rear Wheel Speed Sensor
Checking the Rear Wheel Speed Sensor
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) If the ABS warning light comes on the dashboard and the diagnosis detects a fault code related to the right rear wheel speed sensor, before replacing…
Front Wheel Bearing Replacement
Front Wheel Bearing Replacement
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To replace the front hub bearing, it is necessary to disassemble the hub itself to position it under a hydraulic press, allowing for the removal and …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos