Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to install led headlights on Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 6, MK VI, AW1, MK 6, Polo VI - Years 2017-2024
Part: Headlight
Operation: How to install led headlights on Volkswagen Polo

In this video tutorial we can see how it is possible to install led headlights on Volkswagen Polo, following simple steps that will help you to better manage your car. You can also order the headlights on the internet, on the Aliexpress site, because they are of good quality; the bulbs in the new headlight are the Hb3 and are equipped with a fan, both for the high and low beams. So once the package arrived and unwrapped. Proceed to disassemble the old headlight of your car with a Phillips screwdriver, unscrew the two torx screws, present in the upper part, which hold the light in the bodywork. Now pull the lighthouse first on the inside and then on the outside. Then disconnect the cables and mount the new headlight. Once you have mounted the new headlight with LED lights, get on board the vehicle, start the engine and adjust the light beam.


Posted on 14 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How do you replace the front headlight of the Volkswagen Polo 8? Read Answer
    • Polo 2001-2009 - How much does the right headlight of a Volkswagen Polo cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos