Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor of the Volkswagen Jetta?

Model: Volkswagen Jetta MK 5, A5 - Years 2005-2010
Part: Starter motor

To replace the starter motor of the Volkswagen Jetta, open the bonnet to locate the part on the right side of the engine block. Disconnect all connectors and power cables from the starter, then loosen all screws securing it in place. Next, access the screws at the bottom of the engine bay to fully free the starter and remove it from its housing. After removal, insert the new replacement part, securing and connecting it appropriately.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Test the Starter Motor on Volkswagen Jetta
How to Test the Starter Motor on Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Below are the instructions for testing the operation of the starter motor on the Volkswagen Jetta. First, remove the starter motor by unscrewing the …
Removing the Starter Motor on VW Jetta
Removing the Starter Motor on VW Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Let’s look at removing the starter motor on a Volkswagen Jetta. Lift the bonnet of the car and secure it. First, use a socket wrench to disconnect th…
Where is the starter motor located in the Volkswagen Jetta?
Where is the starter motor located in the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this video we can see where the starter motor is located in the Volkswagen Jetta and how to proceed in case we need to replace it, a relatively si…

Other guides you may be interested in

    Frequently Asked Questions

    • Jetta 2010-2018 - Where is the starter motor of the Volkswagen Jetta located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos