Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator and Wiper Stalks of the Volkswagen Golf

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012

See other generations:
Video tutorial

Today, in this brief and simple guide, learn how to disassemble and replace the switches for the indicator and wiper stalks of the Volkswagen Golf. First, open the bonnet and disconnect the battery; then, get inside the vehicle and remove the steering wheel, first taking out the airbag and unscrewing the central screw, as shown in the video.

At this point, remove the steering angle sensor by unscrewing the screws to also take off the stalks; replace the component with a new one and reassemble everything!


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades of the Golf 7
How to Replace the Wiper Blades of the Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) This video shows how to replace the wiper blades of the Volkswagen Golf 7. This procedure is useful when the blades start to malfunction. To replace …
How to Replace the Hazard Light Switch on the Volkswagen Golf
How to Replace the Hazard Light Switch on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today, we will go through the procedure for removing and replacing the hazard light switch on the Volkswagen Golf. First, get inside the cabin and st…
How to Reset the Wipers on a Volkswagen Golf 5
How to Reset the Wipers on a Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In today's video, you will see how to reset the functionality of the window wiper switch on a Volkswagen Golf 5. This operation is useful when the ba…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos