Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Engine Air Filter

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Air filter

See other generations:
Video tutorial

The air filter housing is located at the front left of the engine compartment (when facing forward), beneath a triangular plastic cover: remove the protective caps to access the securing screws and take off this cover. Then, remove the air intake hose that connects the filter box to the intake system, unclip the metal tabs securing the filter box cover, and extract the old filter, ensuring no dirt falls into the intake duct.

Insert the new filter, ensuring the seal fits well, and reassemble the cover, the intake hose, and the outer cover.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) The following guide shows how to change the air filter of your car using classic DIY methods. The air filter is one of the engine parts most prone to…
Volkswagen Passat (2010-2014 / B7) If the air filter in the engine bay of your Volkswagen Passat B7 is excessively worn and you want to replace it with a new one, follow these steps. F…
Volkswagen Passat (1988-1996 / B4, B3) To correctly complete the replacement of the cabin air filter of your Volkswagen Passat B4, follow the procedure described in this guide. First, ensu…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Guide to replacing the 12V battery on the Toyota Yaris Cross

Today, we will go through the main instructions to remove and replace the 12V battery on the Toyota Yaris Cross. First, open the right rear door of the vehicle and start by removing the plastic cover located under the seat in the corner. You will find the battery inside, where you will disconnect both battery terminals (positive and negative), as shown in the video. Now, remove and replace the battery with a new one of the correct type and the same amperage; then, reinstall the battery and finally the plastic cover.

Watch the video!


by ScegliAuto

More videos