Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Lights on a Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
Video tutorial

In this tutorial, you will see how to remove the rear lights on a Volkswagen Polo, a very simple and quick operation, to be carried out if you need to replace a bulb or the entire unit. First, ensure that the key is not inserted, then open the boot lid, remove the carpet located at the back of the light in question, and unscrew the large plastic bolt.

Next, grasp the light unit, pull it towards you, and separate it from the bodywork. At this point, simply disconnect the power connector and replace the damaged unit.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to remove the rear lights in the Volkswagen Polo?
How to remove the rear lights in the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this tutorial, we can see how to remove the rear lights in the Volkswagen Polo, an extremely simple and quick operation. First of all, make sure t…
How to Remove the Rear Lights on the Volkswagen Polo?
How to Remove the Rear Lights on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this tutorial, you will see how to remove the rear lights on the Volkswagen Polo, a very simple and quick operation to perform if you need to repl…
How to Remove the Rear Lights on the Volkswagen Polo?
How to Remove the Rear Lights on the Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) In this tutorial, you will see how to remove the rear lights on the Volkswagen Polo, a very simple and quick task to perform if you need to replace a…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos