Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Polo
  6. : How to remove the rear lights on the Volkswagen Polo?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 6, MK VI, AW1, MK 6, Polo VI - Years 2017-2024
Part: Tail light
Operation: How to remove the rear lights on the Volkswagen Polo?

In this tutorial, we can see how to disassemble the rear lights on a Volkswagen Polo, a very simple and quick operation to be carried out in case we need to replace a faulty bulb or the light itself. First of all, let's make sure the key is not inserted, then open the trunk door and remove the small panel located on the back of the light in question. Next, we disconnect the power connector, unscrew the large plastic bolt, and, pulling towards us, extract the light from the body. At this point, we can proceed with the replacement of the damaged element.


Posted on 24 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos