Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Polo
  6. : How to disassemble the rear lights in Volkswagen Polo?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Tail light
Operation: How to disassemble the rear lights in Volkswagen Polo?

In this tutorial we can see how to disassemble the rear lights in the Volkswagen Polo, a very simple and fast operation, to be carried out if we need to replace a bulb or the entire element. First of all, make sure that the key is not inserted, then open the trunk and move the carpet on the back of the headlight in question. We then unscrew the big white plastic bolt, disconnect the power connector and separate the headlight from the bodywork. At this point we can replace the damaged element and recompose everything following the reverse procedure.


Posted on 22 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos