Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear lights in the Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
Video tutorial

In this tutorial, we can see how to remove the rear lights in the Volkswagen Polo, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work in complete safety, then open the trunk door and release the carpet located on the back of the headlight in question.

Then unscrew the indicated white plastic bolt, grab the headlight and, pulling it towards you, separate it from the bodywork. At this point, all that remains is to disconnect the power connector and install any replacement following the reverse procedure.


Posted on 14 December 2024 by ScegliAuto


Related tutorials

How to Remove the Rear Lights on a Volkswagen Polo?
How to Remove the Rear Lights on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this tutorial, you will see how to remove the rear lights on a Volkswagen Polo, a very simple and quick operation, to be carried out if you need t…
How to Remove the Rear Lights on the Volkswagen Polo?
How to Remove the Rear Lights on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this tutorial, you will see how to remove the rear lights on the Volkswagen Polo, a very simple and quick operation to perform if you need to repl…
How to Remove the Rear Lights on the Volkswagen Polo?
How to Remove the Rear Lights on the Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) In this tutorial, you will see how to remove the rear lights on the Volkswagen Polo, a very simple and quick task to perform if you need to replace a…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos