Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

To adjust the handbrake travel, you need to remove the rear part of the centre tunnel, where the armrest is attached. Start by unclipping the trim around the rear, which also has the air vents attached.

Then, continue by unscrewing the various fixing screws until you can lift the armrest support and access the adjustment nut for the handbrake cable. Release the handbrake and adjust the nut until the lever rises by only three or four clicks.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This guide provides the necessary instructions to adjust the handbrake on the Volkswagen Golf. First, get to the rear of the vehicle and start unscre…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, we will discover the instructions that will allow you to dismantle and replace the handbrake cable of the Volkswagen Golf. First, get inside t…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this short video, we will cover the main instructions for adjusting the handbrake cable on the fifth series Volkswagen Golf, in GTI version. First…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos