Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to disassemble the front seat of the Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Seat
Operation: How to disassemble the front seat of the Volkswagen Polo

We see below the main instructions that will allow us to disassemble and replace the front passenger seat of the Volkswagen Polo. First of all, we open the front door and start unscrewing all the fixing screws that we find on the seat guides; we move the seat forwards and then backwards to be able to access all the screws, using a torx wrench with extension to remove them, as illustrated in the video. At this point we disconnect the electrical connector that we find under the seat, removing it from the passenger compartment; by applying the reverse procedure for reassembly!


Posted on 14 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How do you remove the rear seats of the Volkswagen Polo? Read Answer
    • Polo 2009-2017 - How to remove the front seat from Volkswagen Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos