Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Radiator on a Volkswagen Vento?

Model: Volkswagen Vento A3, MK 1 - Years 1991-1998
Part: Heater core

To replace the heating radiator on a Volkswagen Vento, you need to completely dismantle the dashboard to access the components inside. Start by removing the plastics from the central panel, then proceed to take out the glove compartment and the plastics around the steering column. By also removing the steering wheel, you can access the interior of the dashboard, allowing you to reach the radiator. Unscrew the fixing screws and disconnect the connectors to extract the old radiator and replace it with a new one.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Volkswagen Vento?
Where are the fuses located in the Volkswagen Vento?
Volkswagen Vento (2005-2011 / A5, MK 2) The fuses of the Volkswagen Vento are contained within the designated fuse boxes installed in the vehicle: this model has two. The first is located o…
How to Reset the Service Light on a Volkswagen Vento?
How to Reset the Service Light on a Volkswagen Vento?
Volkswagen Vento (2010-2022 / Polosedan, A05) In this tutorial, we will see how to reset the service light on a Volkswagen Vento, a very simple and quick operation to perform only after completin…
How to Replace the Air Filter in a Volkswagen Vento
How to Replace the Air Filter in a Volkswagen Vento
Volkswagen Vento (1991-1998 / A3, MK 1) In this tutorial, we will see how to replace the air filter in a Volkswagen Vento, a very simple and economical operation. First, ensure the engine i…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos