Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the ABS Pump

Model: Volkswagen Polo MK III, Polo III, Polo 3, MK 3, 6N - Years 1994-2003

If you need to replace the ABS pump on this model of car, the description provided below contains the necessary instructions and steps for removal. After lifting the bonnet, proceed to remove the battery and the coolant reservoir. Underneath it, you will find the pump. Use a spanner to unscrew the fastening nuts of the pipes and the pump itself from the engine. At this point, disconnect the power connector and proceed to extract and remove the pump from its housing, and the job is complete.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on a VW Polo
How to Replace the Fuel Pump on a VW Polo
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) Typically, when you first turn the ignition on, you should hear the sound of the fuel pump activating from the rear of the cabin. If this does not ha…
Fuse Diagram for the Volkswagen Polo
Fuse Diagram for the Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) This vehicle has two fuse boxes. The first is located in the cabin just below the steering column at the bottom of the dashboard, protected by a plas…
How to tell if there is a fault with the wheel ABS sensor
How to tell if there is a fault with the wheel ABS sensor
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Let's see how to determine if there is a fault with the ABS sensor: in this case, it is a Volkswagen Polo, but the system can be applied to any vehic…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos